Table of Contents
Advertisement
UT035AH EN.fm Page 9 Thursday, June 26, 2008 12:45 PM
Dual Watch Mode
Your radio can scan the current channel and another chan-
nel alternately. You need to set a channel number and its
Sub-code for another channel.
To set the another channel and start Dual Watch:
1. Enter the Common Menu and select "2CH", then press
key to proceed to Dual Watch Mode setting.
SEL/
The Dual Watch icon appears.
2. Press the
or
to select the channel number, then
press the SEL/
key.
3. Press the
or
to select the Sub-code number, then
press the SEL/
key.
4. The radio starts Dual Watch.
If you set the same channel number and Sub-code as
Note:
the current channel, Dual Watch does not work.
To turn the Dual Watch mode OFF:
Press the MENU/GRP key.
Voice Operated Transmission
Your TLKR T7 radio is equipped with a user selectable
Voice Operated Transmitter (VOX) that can be used for
automatic voice transmissions. The VOX feature is
designed for hands-free purpose. Transmission is initiated
by speaking into the microphone of radio or headset
(headset is not included) instead of pushing the PTT key.
To select the VOX level:
1. Enter the Common Menu and select "VOX". Then press
key. The current level (OFF. 1-5) blinks. Level "N"
SEL/
(OFF) disables VOX, while levels 1-5 set the sensitivity of
the VOX circuit.
2. Press the
or
key to select the desired VOX
sensitivity level. Use Level 1 in quiet environments, and
use level 5 in very noisy environments. You can find the
appropriate sensitivity level by speaking into the
microphone. If the VOX icon flashes, your voice is
accepted.
3. Exit the Common Menu.
When you continue to transmit using VOX function for
Note:
60 seconds, the radio emits TX Time Out tone and the
icon flashes for 5 seconds.
Room Monitor Feature
You can use one of your TLKR T7 radios as a room monitor
and use the other radio to listen to and keep a check on the
voice in another room. When you set the room monitor fea-
ture, the monitoring radio will detect voice/noises (accord-
ing to the sensitivity level you set) and transmit back to the
listening radio without pushing the PTT key. The monitoring
radio is not able to receive any transmissions in this mode.
To turn the Room Monitor ON:
1. Enter the Common Menu and select "ROOM". Then
press SEL/
key.
2. Press the
or
key to select the desired room moni-
tor sensitivity level. Use level 1 in quiet environments,
and use level 5 in very noisy environments.
3. Press the SEL/
key to operate the Room Monitor.
To turn the Room Monitor OFF:
Press the MENU/GRP key.
9
Advertisement
Table of Contents
