Table of Contents
Advertisement
UT035AH EN.fm Page 11 Thursday, June 26, 2008 12:45 PM
Up timer
You can use this radio as a up timer. It can time up to 59
minutes 59 seconds.
After this period of time, it will continue starting with "00:00".
To use up timer:
1. Enter the Common Menu and select "TIME".
2. Press the SEL/
key to choose this menu.
3. Press the SEL/
key. Up timer starts.
4. Press the SEL/
key, it goes to pause status.
Pressing the SEL/
key controls the On/Off for timer
start.
5. Pressing the MENU/GRP key while counting or pausing,
reverts the radio to idle time (time reset 00:00) mode.
6. Press the PTT key or press MENU/GRP key at idle sta-
tus to stop up timer.
You can receive incoming signals during this mode.
Note:
If an All Call is received, the ID Name will be indicated for
10 seconds. If a Direct Call is recieved, the ID Name will be
indicated for the status. Then the radio will return to the
timer mode and the Call Icon will blink.
Group Mode
Press and hold the the MENU/GRP key to go to Group Menu.
Channel Setting in Group Mode
Press the SEL/
key in Group Mode to enter to Channel
Setting.
Press the
or
key to select "Auto Channel Change
Setting" or "Manual Channel Setting".
The display shows the following:
Manual Channel
Auto Channel Change
Setting
Press the SEL/
key to enter to each setting.
Press the MENU/GRP key to go back to Idle status
Note:
Set Auto Channel Change
A channel number blinks and the Sub Code segments
show "ALL".
Press the
or
key to select the channel.
Press
key or SEL/
key to transmit Auto Channel
Change command.
Press the MENU/GRP key to go back to Channel
Note:
Setting in Group mode.
Set Manual Channel in Group Mode
A channel number blinks and the Sub Code segments
show "MY".
Press the
or
key to select the channel.
Now, Manual Channel is available.
Press the SEL/
key to exit from Manual Channel setting.
Press the MENU/GRP key to go back to Channel
Note:
Setting in Group mode.
11
Advertisement
Table of Contents
