Vertical Text - Brady BMP 41 User Manual

Vertical Text

In Vertical text, each character drops down a line below the preceding character.
Example:
Vertical text can only be applied to an area or a label. It cannot be applied line-by-line.
To format text vertically:
Navigate to the label or area where you want to display text vertically.
1.
Press Label Settings
2.
OR
Press Area
Choose Vertical>On.
3.
Press Enter
4.
The word(s) display vertically on the label or in the area.
If more than one line of text is present, the second and subsequent lines of text display
vertically to the right of the first line of text.
Multiple lines, before applying Vertical text
The word "WIRE" as vertical text displays as such:
.
.
.
(autosized)
Figure 23 • Multi-line vertical alignment
W
I
R
E
Multiple lines, after applying Vertical text
(autosized)
57
Labels and Areas
Vertical Text
BMP ® 41 User's Manual