Firmware Upgrades - Brady BMP 41 User Manual

4
Introduction

Firmware Upgrades

Temperature* (Printer)
Relative Humidity
(Printer)
Firmware Upgrades
Future upgrades to BMP
Access
Printer from the list of products.
®
BMP 41 User's Manual
Environmental
®
*Exposing the BMP 41 Label Printer to direct sunlight is not recommended.
Avoid using the system near water, in direct sunlight, or near a heating device.
Do not attempt to use batteries other than those recommended in this manual.
®
41 Label Printer firmware can be downloaded from Brady's website.
www.bradyid.com/BMP41
Operation
4° to 43° C (40° to 110° F)
Be mindful, when using the
AC adapter with the printer,
that the AC adapter is rated
at a maximum temperature
of 30° C (86° F).
20% to 90% (non-
condensing)
, click Support>Downloads, then select BMP
Storage
-18° to 43° C (0° to 110° F)
10% to 90% (non-
condensing
®
41 Label