30
Setup
Units
Time/Date
The following settings can be found under the Time/Date menu in the Setup function. Set the
Time/Date options upon initial start-up of the printer.
Units
The Units setting is used to configure label parameter measurements for the printer. The units
are:
Once configured, you do not have to indicate "inches" or "millimeters" (or their globally
accepted abbreviations or marks) when entering numbers in data fields. Likewise, in any scale
or range of measurement field (using spinner boxes or in a drop down list), the range of
measurements will automatically configure to the units selected in the Setup function.
®
BMP
41 User's Manual
Figure 10 • Time/Date settings in Setup function
• Inches
• Millimeters