Config - Brady BMP 41 User Manual

Config

The following settings can be found under the Config menu in the Setup function.
The Shut Off Delay sets the auto-off time-out. This refers to the number of minutes of
inactivity after which the printer automatically shuts off.
When using the AC adapter, power is constant so there is no drain on the battery. In this case,
you can turn off the Shut Off Delay by choosing No Shut off (AC).
The Backlight time (sec.) sets the backlight auto-off time-out. This refers to the number of
seconds of inactivity after which the backlight automatically shuts off.
If you prefer to keep the backlight on at all times while using the AC adapter, choose Always
on.
The Brightness setting increases or decreases the brightness of the display screen.
Figure 9 • Printer configuration in Setup settings
29
Setup
Config
®
BMP 41 User's Manual