Brady BMP 41 User Manual page 103

Navigate to the Separator field and, from the drop down list, select the separator to use.
4.
Navigate to the Orientation field and, from the drop down list, select the desired layout.
5.
Line Separator, Vertical Orientation
Navigate to the Terminal Repeat field and indicate the size of the gap between each
6.
terminal (with a minimum of 0.2 inches).
If you are serializing the Terminal Block label type, you do not need to enter the Number of
Terminals. The serialization values determine how many labels to create. Proceed to Step 8.
In the Number of Terminals field, enter the number of terminals on the block for which the
7.
label is intended.
When finished, navigate to
8.
If the Serialize option box is checked, the Serial dialog box displays.
Complete the Serialization values. (See "Add Serialization" on
9.
information.)
When finished, navigate to
10.
The number of terminal blocks are created as areas on one label, with the serialization
characters displayed in each area. If serialization was not used, on the Editing screen, enter
unique data for each label, using Next Area or Prev Area to move to the different areas.
Use Print Preview to view the multi-area label before printing. (See
on navigating multi-area labels in Print Preview.)
Figure 35 • Separators and Orientation
and press Enter
and press Enter
Terminal Block, Patch Panel, 66 Block
Accessing a Label Type
Tic Separator, Horizontal Orientation
.
page 66
.
page 80
BMP ® 41 User's Manual
91
for more
for information