Brady BMP 41 User Manual page 5

Batteries Directive 2006/66/EC
Notice to Recyclers
To remove the lithium battery:
Disassemble printer and locate the lithium cell battery located on the main circuit
1.
To remove, push down on the center tab of the battery retainer, remove the battery from
2.
the board, and dispose of in accordance with local regulations.
To remove the NiMH battery:
Turn the printer over, open the battery compartment door, and remove the NiMH battery.
1.
Release the battery from the printer and dispose of in accordance with local regulations.
2.
This product contains a lithium battery. The crossed-out wheeled bin shown
to the left is used to indicate 'separate collection' for all batteries and
accumulators in accordance with European Directive 2006/66/EC. Users
of batteries must not dispose of batteries as unsorted municipal waste. This
Directive determines the framework for the return and recycling of used
batteries and accumulators that are to be collected separately and recycled
at end of life. Please dispose of the battery according to your local
regulations.
board.
®
BMP 51 User's Manual