Brady BMP 41 User Manual page 115

Problem
Power ON/OFF - Printer not working (continued)
Printer frequently powers OFF.
Printer not responding
Error - "Cut while printing"
Print Quality
Poor print quality
Poor print quality.
Poor print quality
Cause
Auto shutoff timing.
Battery is dead.
Operating cutter while labels are
still printing.
Battery pack may be worn out and
not properly holding a charge.
Dust or adhesives accumulated on
the print head.
Media not usable.
Troubleshooting
Corrective Action
Adjust the Shut Off Delay timing in
the Setup>Config menu. (See
page 29.)
Attach the AC adapter to provide
power to the printer and charge the
battery.
OR
Install a new battery.
Cut through the material
1.
completely.
Press Clear
2.
key to clear error.
Reprint the label(s).
3.
Battery life is approximately one to
three years, depending on its use
and care. Order a replacement
battery pack.
Clean the print head. (Refer to
page 106 for instructions on
cleaning the printer.)
Try another media cartridge.
BMP ® 41 User's Manual
103