Brady BMP 41 User Manual page 107

In the 110- and Bix Block applications, the number of areas created is based on the pair
configuration selected.
• 2 pair = 24 areas
• 3 pair = 16 areas
• 4 pair = 12 areas
• 5 pair = 10 areas
• Blank = 2 areas
Vertical and horizontal separator lines are automatically added.
The following example displays the areas based on the Block Type selected (i.e., 2-pair, 3-pair,
4-pair, 5-pair, or blank). The "Blank" strip is formatted as two areas covering the full printable
length of the strip.
In the Block Type field, from the drop down list, choose the pair configuration to use.
3.
Sequence Type is used to determine how, and if, you want to serialize data. If None is selected,
the areas are blank and you can independently enter data in each area of the strip. Horizontal
increments one number per area, based on the start value.
Figure 37 • Sample pair configurations
110-Block, Bix Block Label Type
Accessing a Label Type
BMP ® 41 User's Manual
95