Installing The Grill Covers; Solid Footing - MartinLogan Motion 60XT User Manual

mend that you aim them towards the primary
listening position.

INSTALLING THE GRILL COVERS

To install this speaker's magnetic grill covers simply
move them into place (Fig. 6).

SOLID FOOTING

With the use of the included outriggers and spikes,
your speakers will be firmly planted on the floor,
bass will tighten, and imaging will become more
coherent. To avoid floor damage, do not implement
the spikes until you are secure in the positioning. The
included spikes use a standard 1/4 - 20 thread.
Outrigger and Spike Installation (Fig. 7):
1) Carefully lay your speaker on its side.
2) Remove existing feet or spikes.
3) Use the 4mm Allen tool and the four bolts pro-
vided with the speaker to attach the outriggers
to the bottom of the speaker.
4) Thread new spikes into holes and screw them
in all of the way. If the speaker does not sit
level loosen one spike until level is achieved.
5) Tighten the jam nut snugly by hand. Do not over
tighten the nut.
6) Right the speaker. Caution: Make sure your
hands and any cabling are clear of the spikes.
Do not slide speaker as spikes are sharp and
can damage your floor or carpet.
7) Adjust to level by rotating spikes. Tighten the
jam nut securely when satisfied that speaker is
level. Caution: "Walking" the speaker may result
in a broken spike.
8
Fig. 6
Fig. 7