How To Use The [ Dsp/Sel ] Knob; Menu Operation - Yaesu FT-450D Operation Manual

When a DSP function is not selected and no ">" icon
is shown in the LCD Graphic Display, then turning
the [ DSP/SEL ] knob controls the frequency in VFO
mode, or selects the memory channel in memory
mode, or selects the menu item in memory mode. In
the VFO Mode, briefly depressing the [ DSP/SEL ]
knob will permit frequency adjustment in 100 kHz
steps (Default setting). (The 100 kHz operation may
be changed with the"SELDIAL" menu function.)
When a DSP function is selected, the ">" icon will
appear next to the function in the LCD Graphic Dis-
play. Then pressing the [ DSP/SEL ] knob will switch
the DSP function on or off. When the DSP function is
on, turning the [ DSP/SEL ] knob will change the func-
tion parameters.
A :
You may change the function of the [ DSP/SEL ] knob
via menu item "SELDIAL".
The Menu System allows you to customize a wide variety of transceiver performance aspects and operating
characteristics. After you have initially customized the various Menu procedures, you will find that you will not
have to resort to them frequently during everyday operation.
1. Press and hold the [ F ] button for one second to
enter the Menu Mode. The "
pear on the display.
2. Rotate the [ DSP/SEL ] knob to select the Menu
Item to be adjusted.
3. Press the [ DSP/SEL ] knob to enable adjustment of
the selected Menu Item. The "
4. Rotate the [ DSP/SEL ] knob to adjust or select
the parameter to be changed.
5. Press the [ DSP/SEL ] knob to save the selection.
The icon appears continuously.
6. Press and hold the [ F ] button for one second to
return to normal operation.
FT-450D O
PERATION
H
OW TO USE THE
M O
ENU
" icon will ap-
" icon will blink.
M
ANUAL
E O
ASY
[ DSP/SEL ]
KNOB
[ DSP/SEL ] knob
PERATION
[ DSP/SEL ] knob
PERATION
[ F ] button
Menu Item or Menu Setting
Page 15