Carrying Handle Mhg-1 Installation - Yaesu FT-450D Operation Manual

I
NSTALLATION OF
The MHG-1 is a Carrying Handle designed to match FT-450D transceiver.
Parts List
Handle ................................................................ 1pc
Handle end ....................................................... 2pcs
Mounting Screws (M4x15B) ............................. 2pcs
Installation
Screw the Carrying Handle to the FT-450D using the
supplied screws.
Do not install the supplied MHG-1 Mounting
Screws if you are not installing the MHG-1!
Also, do not use an improper screw for mount-
ing the MHG-1! An improper screw may cause
a "short circuit" to the internal circuitry, caus-
ing serious damage!
Page 94
O
PTIONAL
C H
ARRYING ANDLE
A
CCESSORIES
MHG-1 I
NSTALLATION
FT-450D O
Handle
Handle end
(2 pcs)
Mounting Screws
(2 pcs)
M
PERATION ANUAL