My Modes Operation - Yaesu FT-450D Operation Manual

The "My Modes" feature allows you to select the operating modes you wish to have available for selection via the
[ MODE ] / [ MODE ] buttons. Only the desired modes will be displayed in the loop.
This feature can be very useful in an HF operation, where the AM/FM/DATA modes are not used.
M M S
Y ODES ETUP
1. Press and hold the [ F ] button for one second to
enter the Menu mode again. The "
will appear on the display.
2. Rotate the [ DSP/SEL ] knob to select the menu
item "MY MODE".
3. Press the [ DSP/SEL ] knob to enable adjustment of
this menu item. The "
4. Press the [ MODE ] / [ MODE ] buttons to choose
a mode you wish to skip (omit) from the mode
selection loop.
5. Rotate the [ DSP/SEL ] knob to select "OFF", and
then press the [ DSP/SEL ] knob.
N
The "OFF" selection sets the selected mode to be
skipped, while the "ON" selection sets the selected
mode to be included in the mode-selection list.
6. Press the [ DSP/SEL ] knob. The "
returns to appear continuously.
7. Repeat steps 4 through 6 to select/deselect as
many modes as you like.
N
The mode currently in use cannot be turned off.
8. Press and hold the [ F ] button for one second to save
the new setting and return to normal operation.
M M O
Y ODES PERATION
Press the [ MODE ] / [ MODE ] buttons to choose the
operating mode on which you wish to operate. Only
those operating modes that have not been skipped
will appear as you scroll through the modes.
N
If you want to recall an operating Mode which has
been set to my band "OFF", Press the [F] button,
then press the [ MODE ] / [ MODE ] button until
the desired Mode appears.
FT-450D O
PERATION
M M
Y ODES
" icon
" icon will be blinking.
" icon
M
ANUAL
O
PERATION
[ MODE ] / [ MODE ] button
[ DSP/SEL ] knob
LSB
USB
LSB
CW
USB
AM
FM
FM
DATA
[ MODE ] / [ MODE ] button
R
ECEIVING
[ F ] button
LSB USB
«
MODE MODE
KEYER CLAR
Page 23
FM