Advertisement
Shurflo 9300 Solar Water Pump Installation Instructions
Lubricate the cable and taped area with silicone
grease. Slide the Outer Cable Boot until it snaps onto
the second step of the plug.
Apply grease to the Outer Cable Boot and tighten
down the Cable Nut. Run the pump to make sure the
connections are right. The Shurflo 9300 is a
diaphragm pump, so you can dry run it without
damage.
Here's what happens to the cable when you don't
apply enough grease when tightening the Cable Nut.
The cable twisted, the connection failed after three
months, and the pump had to be pulled out of the
well to repair the cable connection.
Page 4
Advertisement
