Mac Users - Brookstone iConvert Instructions Manual

• From the "Windows Start" menu, right click on "Computer" and select "Properties"
from the pop-up menu . Click on "Device Manager" on the following screen .
• In the "Device Manager" window, right click on 600dpi USB Scanner under
"Other Devices" and select "Update Driver Software" from the pop-up menu .
Click on "Browse my computer for driver software" in the window that appears,
and click the "Browse" button .
• In the "Browse For Folder" window, select the folder that contains this scanner
driver and click the "OK" button to return to the previous screen .
• Click on the "Next" button in the window that appears, and skip to FINISHING
THE INSTALL at the bottom of this page .
mac users
®
• Insert the Setup/Application CD-ROM into your CD-ROM drive .
• Double click on Apple Installation folder on your desktop to load MAC
DRIVER software and follow instructions .
• After the software/driver is installed, close all open applications, click on
the "Finish" button and restart your computer .
fINIshING ThE INsTall
• Follow the on-screen instructions to install all software that your new
scanner requires .
• After the software is installed, close all open applications and click on
the "Finish" button and restart your computer .
windows 7 users: you will be prompted to calibrate your scanner before you
restart your computer. please see calibrating your scanner on the following page.
8