Brookstone iConvert Instructions Manual page 8

windows Xp users
• Insert the Setup/Application CD-ROM into your CD-ROM drive .
• Select "Install the Software Automatically (Recommended)" and click
on the "Next" button .
• Click on the "Next" button in the window that appears, and skip to
the FINISHING THE INSTALL section on page 8 .
windows vista
• Select "Locate and Install Driver Software (Recommended)" when
the "Found New Hardware" window is displayed .
• Click on the "Continue" button when the "User Account Control"
button pops up .
• Insert the Setup/Application CD-ROM into your CD-ROM drive
when the system prompts you to "Insert the disk that came with
your USB Scanner" and then click on the "Next" button .
• During the process of the installation, a message "Windows can't verify
the publisher of this driver software" may appear . Please ignore and click
on "Install this drive software anyway" to continue the installation .
• Click on the "Next" button in the window that appears, and skip to
the FINISHING THE INSTALL section on page 8 .
windows 7 users
• Insert the Setup/Application CD-ROM into your CD-ROM drive . Close the
AutoPlay window that appears .
7
users
®