Valve Tray Replacement - Regency Fireplace Products HZ54E-NG1 Owners & Installation Manual

1) Turn the unit off and allow it to cool down to room temperature.
2) Turn off the gas supply to the unit.
3) Remove the faceplate by lifting it up off the hinges on the sides of the
fi rebox.
4) Remove the door frame overlay by swinging out 45
and lift up and out.
Regency Horizon HZ54E-1 Gas Fireplace

VALVE TRAY REPLACEMENT

o
from the bottom
5) Remove the glass door.
a) Remove the 3 screws shown below at the bottom of the glass
.
door
b) Swing the door out 45
Note: See next pages for specifi c instructions for NG / LP units.
Prior to removing burner - remove the following (if installed):
-crystals
-pebbles
-spa stones
-logs
-Inner panels
MAINTENANCE
o from the bottom and lift up and out.
61