Hotpoint RGB751GEL Use And Care Manual page 9

Table of Contents

Advertisement

Electronic Controls
. . . . . . . . . . .
Oven "On" Indicator
The word "ON" is displayed when
the BAKE or BROIL button is
energized, and goes out when the
CANCEL button is pushed or
when the oven burner shuts off
automatically.
The oven operation is controlled
electronically. The following
instructions tell you how to operate
the electronic controls.
To Set the Clock
1.
Push CLOCK button.
2. Turn SET knob to correct time
of day. Clock is now set. The clock
must be set to the correct time of
day for accurate automatic oven
timing operations.
SET
To Set the
Minute/Second Timer
1. Push TIMER button.
2. Turn SET knob to desired
amount of time (up to 9 hours and
59 minutes). The Minute/Second
Timer will begin to count down
within a few seconds.
3. When time is up, the End-of-Cycle
Tone (3 long beeps) will sound and
the display will again show the time
of day.
Note: The Minute/Second Timer is
a reminder only and will not operate
the oven.
You can use the Minute/Second
Timer whether or not the oven is
being used. The Minute/Second
Timer does not interfere with oven
operations.
Cancel the Timer
To
Push and hold TIMER button for
three seconds. This will clear the
Minute/Second Timer function.
9
To Bake
1. Push BAKE button.
2. Turn SET knob until desired
temperature is displayed.
A one-second beep will sound
when the oven has preheated to and
stabilized at selected temperature.
3. When finished baking, push
CANCEL button.
Note: To recall what temperature
you have selected while the rising
temperature is being shown, push
and hold the BAKE button. The
selected temperature will be shown
while you hold the BAKE button.
The actual oven temperature will
be shown after a few seconds.
You can push the CLOCK button
to display time of day without
canceling the oven operation.
You can change the selected
temperature at any time by
pushing the BAKE button and
turning the SET knob.
To Broil
1. Push BROIL button.
2. Turn SET knob until your
choice of HI BROIL or LO BROIL
is visible in the display.
When finished broiling, push the
CANCEL button.

Advertisement

Table of Contents
loading

Table of Contents