Input Port & Features - µ-Dimension Glow DSP8 Instruction Manual

DSP8 Input Harness Port-
Because of the wide range of head units used in vehicles worldwide,
both OEM and aftermarket the DSP-8 has one of the most flexible
input configurations available. This section will cover a variety of
applications and the information needed to connect the DSP8 into
your vehicle. Please be advised that some vehicles can require
special installation wiring and or custom passive loading devices
depending on the electronic design of the output of your source unit.
Low Level (RCA) input-
The DSP8 by factory default
comes prepared for low level
RCA input capable of accepting 6
channels of balanced Low Level
RCA inputs up to 4 Volts RMS
with an selectable optional
3.5mm unbalanced input for
portable media storage devices.
Turn On Input/Output -
Input - 12 switched signal on input turns on the DSP and its
internal amplifier.
Output- The DSP8 has a processor controlled turn on circuit for
your additional subwoofer amplifier. This dedicated output
circuit is capable of driving amplifiers up to 220ma at 12
Volts and is capable of being delayed and controlled thru
your PC interface.
Profile 1-
When triggered and sustained with 12V+ the DSP will automatcally
change to the alternate profile (Preset 2) without the need to use the
PC. When the circuit is opened and seperated from 12V+ connec-
tion the DSP8 returns to the main profile (Preset 1)
Profile 2-
Not Functional (Future feature) Do Not Connect
Page 7