Saving And Retrieving Setup Files - µ-Dimension Glow DSP8 Instruction Manual

Saving + Retrieving Setup Files with your PC
The advantage to using a PC based sound processor is that
you are not limited to the presets available on the user utility. The
DSP8 incorporates a multi tiered file management system that
enables the user to save thousands of complete setup files on his/her
hard drive.
The process is very simple. After you have finished making
all of the necessary adjustments to your DSP8 locate and open the
"File" tab in the upper left hand corner of the user utility. Then Click
the "Save Settings As" listing and you will be directed to a system file
window where you can custom name the settings as well as if
desired select a custom location on your hard drive for where to save
it (Not Recommended).
To retrieve saved files on your PC click on the "File" tab in
the upper left had corner of the user utility. Then click the "Open
Settings" listing, then highlight the desired file listing and click "Open"
and your user interface will reflect your saved settings file in its
entirety. Once the file is uploaded be sure to go to the EQ panel and
click on the Sync>DSP8 button so that the DSP and sound will reflect
these newly imported settings.
Page 15