Connecting To Your Pc - µ-Dimension Glow DSP8 Instruction Manual

Connecting to your PC

Now that you have installed your DSP8 into your vehicle it is time
to start setting up your system. After you load the DSP8 software to
your computer you will connect your PC to the DSP8. The DSP8
software is compatible with 32Bit and 64 Bit computers running the
Windows XP, Wndows Vista and Windows 7 operating platforms.
Please note that not all computers are the same and may require
full updates to your computers USB interface. It is recommended that
if you have trouble connecting to the DSP that you disconnect all USB
devices and then plug the DSP8 into your PC and then turn on the
software.
Connecting to the DSP8 -
Using a USB to USB Mini cable, plug your
laptop into the DSP8. (It is recom-
mended that cables be no longer than
6ft in length as longer lengths can cause
issues resulting in not being able to
connect to your DSP8 or potential faulty
communication during your tuning
session not allowing the features to
function correctly).
For more information on updating your computers USB drivers or
operating system please contact your computers manufacture or
Microsoft update for additional information
Other Requirements-
If this is your first time using the DSP8 Software you may be prompted
to load and install Microsoft .Net Framework. This is required for
operation and function of the DSP8 and its software package.
Page 11