V.u. Meters - µ-Dimension Glow DSP8 Instruction Manual

V.U. Meters

The DSP8 microprocessor has an advanced diagnostics
and signal monitoring system built into the user interface
allowing the user to monitor and test the individual
settings of each channel at different spots thru the audio
path within the DSP and the signal passing thru it.
V.U. meters can be used to level match frequency
dependent input signals for signal summing capability,
monitoring signal coming from the head unit, verification
of settings throughout the DSP, and much much more!
Input V.U. Meter
- Monitor signal level of all channels of
signal into the DSP8
- Verify signal output from source
- Level match input signals from
frequency dedicated outputs of factory
radios to sum multiple channels into 1-8
channels of full range full bandwidth
signal for aftermarket applications.
- Detect signal distortion being generated
from the source unit preventing prema-
ture clipping of the systems sound.
- Optimize input levels to help achieve
maximum volume with minimal artifacts
and noise floor.
Page 26