µ-Dimension Glow DSP8 Instruction Manual page 25

Step 7-
With the JM60 Folder selected click "OK" and then on
the
update screen you will see the address for the correctly
selected file in the location window. Now Click "Next".
After clicking next you will be prompted for authorization to give
permissions to install the new driver. Please click the "Install driver
software anyway". You are now finished with your USB driver
Update. Rest assured you will never have to do that again unless
you attempt to update firmware on another computer.
After the update has been completed it is recommended that you After the update has been completed it is recommended that you
power cycle your DSP8 and now begin the firmware update process power cycle your DSP8 and now begin the firmware update process
located on page 14. ocated on page 14.
Page 24 Page 24