µ-Dimension Glow DSP8 Instruction Manual page 20

Step 3
- Next a new window will pop up advising you that upon
completion of the firmware update you will have to power
cycle (Power off and then back on) to fully update the
system. Click "OK"
Step 4 -
Once you have accepted the requirement to power cycle the ce you have accepted the requirement to power cycle the
DSP8 you will be prompted with a pop-up window indicating P8 you will be prompted with a pop-up window indicating
the beginning of the firmware update process. beginning of the firmware update process.
During the firmware update process do not unplug your PC from irm mware update process do not unplug your PC from
the DSP8, turn off or alter the power level to the DSP8, attempt to n off or alter the power level to the DSP8, attempt to
disrupt the firmware update process or turn off your computer.
Doing so will cause the update to fail and will lock up your DSP8 cause the update to fail and will lock up your DSP8
requiring it be sent back to the factory to be reprogrammed and e sent back to the factory to be reprogrammed and
Step 5 -
Your firmware update is now complete. Please power cycle
your DSP8 (Turn of then back on) and you will hear music
once again and you will be able to enjoy your new updates.
**** IMPORTANT NOTICE!!!!!! **** **** IMPORTANT NOTICE!!!!!! ****
p p
rmware update process or turn off your computer.
unlocked unlocked
firmware update is now complete. Please power cycle
p g y
Page 19