Speaker Output Harness & Port - µ-Dimension Glow DSP8 Instruction Manual

DSP8 Output Speaker Harness Port
1
Balanced RCA Output
Pin 1- (Grey)
Pin 2- (Violet)
Pin 3- (Blue)
Pin 4- (Green)
Pin 5- (Yellow)
Pin 6- (Orange)
Pin 7- (Red)
Pin 8- (Brown)
Pin 9- Balanced RCA Output RCA +
Pin 10- (Grey w/Black Stripe)
Pin 11- (Violet w/Black Stripe)
Pin 12- (Blue w/Black Stripe)
Pin 13- (Green w/Black Stripe)
Pin 14- (Yellow w/Black Stripe)
Pin 15- (Orange w/Black Stripe)
Pin 16- (Red w/Black Stripe)
Pin 17- (Brown w/Black Stripe)
Pin 18- Balanced RCA Output RCA Shield
Balanced RCA Out- For use on most OEM subwoofer amplifiers
Unbalanced RCA Out - For use on aftermarket subwoofer amplifiers
(Channel 8 output group is limited to one function. Using balanced
and unbalanced outputs and/or with/without Channel 8 speaker
output can cause damage to your DSP8 and will not be covered
Page 10
9
18
under warranty)
Channel 8 +
Channel 7 +
Channel 6 +
Channel 5 +
Channel 4 +
Channel 3 +
Channel 2 +
Channel 1 +
Channel 8 -
Channel 7 -
Channel 6 -
Channel 5 -
Channel 4 -
Channel 3 -
Channel 2 -
Channel 1 -