Program; Storing A Program; Editing And Deleting Programs - Sharp MX-M503N Operation Manual

Program

If you frequently use the same settings and/or functions to transmit to the same destination or destinations, the settings
and destinations can be stored in a program. This allows the settings and destinations to be selected by simply selecting
the program.
When the [Program] key is touched, the following screen appears.
• [Add New] key
Use this to add a new program.

Storing a program

Touch the [Add New] key in the above screen to open a registration screen. Up to 48 programs can be stored.
For more information, see "Settings" (page 7-19).
• A timer setting cannot be included in a program.
• At least one one-touch key must be specified in a program or the program cannot be stored.

Editing and deleting programs

A program can be selected from the list in the above screen to open an edit/delete screen for the program.
For more information, see "Settings" (page 7-19).
Delete a program with the [Delete] key.
Settings
Item
Program Number
Program Name
Address
Address Book screen
Condition Settings
Address Mode Setting
Mode Settings
Downloaded From ManualsPrinter.com Manuals
System Settings
Program
Program 1 Program 2
Program 3 Program 4
Program 5 Program 6
Program 7 Program 8
Program 9 Program 10
Program 11 Program 12
Set the number to be assigned to the program. The lowest available number is
automatically entered. To change the number, enter a number from 01 to 48. A
number that has already been stored cannot be used.
Enter a maximum of 36 characters for the program name.
Select the address(es) to be used in the program from the address book. Up to 500
destinations can be stored in one program.
This displays a list of the currently stored addresses.
Touch the [Setup] key to open the condition settings screen for an address.
Select the mode in which the address is used (Internet fax, scan, etc.) When a mode
is selected, the settings for that mode appear.
Frequently used settings can be stored in the same way as when they are selected
for a mode.
7-19
Back
Add New
• List display
This displays a list of the currently stored programs. A
program can be selected to open an edit/delete screen
for the program.
Description
SYSTEM SETTINGS
Contents