Sharp MX-M503N Operation Manual page 549

Scan/Special Modes
Suppress Background
Light areas of the original may be suppressed as background.
4
Press the [START] key.
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
When scanning finishes, place the next original and press the [START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key.
5
A beep will sound to indicate that scanning is finished.
When the original is scanned in [Mono2], the suppress background function will not operate.
To cancel scanning...
Press the [STOP] key (
To cancel the background suppression setting...
Touch the [Cancel] key in the screen of step 4.
Downloaded From ManualsPrinter.com Manuals
(1)
Cancel
1 3
) to cancel the operation.
Select the suppress background setting.
(2)
(1) Adjust the background suppression level.
OK
Touch the [+] key to suppress only faint background.
OK
Touch the [-] key to suppress faint to dark background.
(2) Touch the [OK] key.
5-82
SCANNER/INTERNET FAX
Contents