Storing Frequently Used Original Sizes; Storing Original Sizes (Editing/Clearing) - Sharp MX-M503N Operation Manual

Original
Size Input
2
You can also touch the

STORING FREQUENTLY USED ORIGINAL SIZES

You can save special original sizes that you frequently use. This section explains how to store, retrieve, change, and
delete special original sizes.

Storing original sizes (editing/clearing)

Up to 12 special original sizes can be stored.
Touch the [Original] key in the base screen of copy mode and then follow the steps below.
Original
Auto
Manual
A5
1
A5R
B5
216x340
Size Input
Downloaded From ManualsPrinter.com Manuals
(1)
Cancel
420
X
(25~432)
mm
Y 297
(25~297)
mm
(2)
keys to change the number.
A4
B5R B4
A4 A3
Inch
A4R
216x343
Custom Size
Enter the original size.
(3)
(1) Enter the X (horizontal) dimension of the
OK
original.
OK
Touch the X (width) numeric value display key to open a
number entry screen. Enter the width of the original with
the numeric keys, and touch the [OK] key in the number
entry screen. When the document glass is used, a
number from 25 mm to 432 mm (1" to 17") can be
entered.
When the automatic document feeder is used, a number
from 140 mm to 432 mm (5-1/2" to 17") can be entered.
If the horizontal dimension of the original is less than 140
mm (5-1/2"), use the document glass.
(2) Enter the Y (vertical) dimension of the
original.
Touch the Y (height) numeric value display key to open a
number entry screen. Enter the height of the original with
the numeric keys, and touch the [OK] key in the number
entry screen. When the document glass is used, a number
from 25 mm to 297 mm (1" to 11-5/8") can be entered.
When the automatic document feeder is used, a number
from 131 mm to 297 mm (5-1/8" to 11-5/8") can be entered.
If the vertical dimension of the original is less than
131 mm (5-1/8"), use the document glass.
(3) Touch the [OK] key.
You will return to the base screen.
Make sure that the entered dimensions appear in the
[Original] key.
Touch the [Custom Size] key.
OK
AB
2-28
COPIER
Contents