Using The Remote Control - Chord CPA 2500 User Manual

Using the remote control

For optimum use hold your remote control flat and point it directly at your pre-amplifier.
selecting your input source
1. 1. Press Bus-A.
2. 2. Press one of: Disc 1, Disc 2, Tape 2, Video or Radio.
adjusting the volume
1. Press the volume button marked
2. Press to decrease the volume. The volume chosen will be displayed on the digital display with figures from 0 to 98.
choosing your output
1. 1. Press O/P 1 if your output is connected to O/P 1 on the back of your integrated amplifier.
2. 2. Press O/P 2 if you are using the line output from O/P 2 on the back of your integrated amplifier.
3. 3. Press OP 1/2 if you are bi-amping.
changing the balance
1. Press the balance button marked
2. Press to move the balance to the right. The direction you are moving the balance towards will be displayed on the
digital display.
mute
1. Press Mute twice to mute the amplifier.
to unmute
1. 1. Press Mute twice again to unmute or
2. 2. Press the volume buttons up or down or
3. 3. Turn the volume knob on your amplifier up or down.
to increase the volume.
to move the balance towards the left.