Brief Menu Guide - Acom 2000A Operating Manual

a) Storage environments: the amplifier can be kept packed in dry and ventilated unheated
premises without chemically active substances (acids, alkalies etc.) in the following climatic
environment:
• temperature range: -40 to +70 degs.Celsius;
• humidity: up to 75% @ +35 degs.Celsius.
b) Shipping Size and Weight:
• W390mm x D340mm x H340mm, 18.3kg - Transformer carton;
• W630mm x D590mm x H300mm, 20.7kg - Amplifier carton.
c) Shipping environments: all types of transportation, including aircraft baggage section up to
12000 meters above sea level.

10. BRIEF MENU GUIDE

• POWER SWITCH -> OFF STATE:
HELP - to read serial numbers, power-on hours, suggestions
• SET/EXIT BUTON -> OFF MENU
CALL SIGN – to change display message while in OFF-state
AUTO ANTENNA CHANGE – to select the logic of the antenna change
AUTO OPERATE – to select the behaviour of the amplifier after a "soft" fault
SELF ADDRESS – to select the address of the amplifier if used in a network
CLEAR THE USER TUNINGS - to delete all USR-tunings
CLEAR THE MEMORY – to delete all stored data
• ON/OFF BUTTON -> MAIN MENU -> OPR/STB BUTTON - to activate and use the amplifier.
AUTO TUNE - to match antennas (USR-tunings preparation)
• SET/EXIT BUTTON -> MANUAL MODE -
MANUAL.TUNE - to match loads manually
MEASURE - to measure various amplifier operating parameters
SERVICE - to check motors' motion and tubes' zero-signal current
CAT SETTINGS – to tell the amplifier what transceiver is connected to it via CAT
MORE SETTINGS
- LOCK – to protect the amplifier from unauthorized users
- GAIN – to define mains voltage excursions
42