Auto Mode; Main Menu - Acom 2000A Operating Manual

Fig.3-3 RCU display - OFF MENU
By means of the UP and DOWN keys you can select one of the listed items. Then with the left
and right arrow buttons you choose the desired value or move the colored frame on it.
The call sign character positions are selected by left and right arrow buttons. The character
in a selected position is changed by means of the UP and DOWN keys. Push the left button
repeatedly to return to the items list.
To exit the OFF menu, press the SET/EXIT button again.
The purpose and use of the OFF menu settings are described in detail in Section 6, after the
description of the basic functions and use of the amplifier.

4. AUTO MODE

Operation of the 2000A amplifier is simplified a great deal due to the high degree of automation.
You can start operation immediately after it is installed. However, to make full use of its
possibilities and to fully configure the amplifier we recommend that you thoroughly read the
following information.

4-1. MAIN MENU

a) TURNING ON
In order to turn on the amplifier, while the Main Power Switch is on, press the red button on the
RCU and hold it on for about one second and you will hear "TEST" being sent in CW.
After successfully passing the INITIAL SELFTEST, the following display appears:
15