Graco 246737 Operating Instructions Manual page 14

Spray Test Pattern
heavy
edges
Clearing Tip Clogs
TI3496A
14
309859
1. Trigger gun and spray test pattern.
Slowly adjust pressure to eliminate
heavy edges. Use smaller tip size if
pressure adjustment can not eliminate
heavy edges.
2. Hold gun perpendicular, 10–12 in.
(25–30 cm) from surface. Spray back
and forth. Use strokes overlapped by
50%. Start gun movement before
triggering gun and release trigger before
stopping gun movement.
1. Release trigger, lock trigger safety. Rotate
tip. Unlock trigger safety and trigger gun
to clear the clog.
Never point gun towards your hand or into
a rag!
2. Lock trigger safety. Return tip to original
position. Unlock trigger safety and
continue spraying.