Table of Contents
Advertisement
PAINT
10
309859
Startup
FLUSH
1. Plug power supply cord into a properly
grounded electrical outlet.
2. Turn prime valve down.
3. Place siphon tube set in grounded metal
pail partially filled with flushing fluid.
4. Attach one end of ground wire to pail and
other end to sprayer or a true earth ground.
5. Do Steps 1 – 5 of Startup to flush out
storage oil. Use water to flush water-base
paint and mineral spirits to flush oil-base
paint and storage oil.
6. Turn pressure control to lowest pressure.
Advertisement
Table of Contents
