Select A Tape-/Disc Device For Direct Operation; Setting The Lock Function - Silvercrest SFB 10.1 A1 Operating Manual

1. For this purpose select in the VOL/MUTE SETUP with the
or
confirm with the OK button
2. Now press the device button
be excluded from the global volume control. The LCD
display
control is deactivated if the URC is working in the opera-
tional mode of one of the selected devices.
You can also cancel the settings again in VOL/MUTE SETUP.
1. For this purpose select in the VOL/MUTE SETUP with the
or
confirm with the OK button
2. The LCD display
to a confirmation which is done by pressing the OK but-
ton . Press the OK button
settings, the SUCCESS indicator then confirms the dele-
tion. Otherwise you press the EXIT button
deletion.

Setting the lock function

With the lock function you can block access to all setup menus.
1. Hold down the S button
onds.
2. With the
confirm with the OK button
3. With the
confirm with the OK button
the current settings.
button the function MODE VOL SET and
shows „SUCCESS" and the global volume
button the function VOL/MUTE RESET and
prompts you, with CONFIRM RESET,
or button
or button
.
for the device that is to
.
If you want to delete the
for a little longer than 3 sec-
select „SYSTEM SETUP" and
.
select "LOCK SETUP and
. The LCD display
to abort the
shows