Setting the global volume/mute switching
1. Hold the S button
3 seconds. The notice „CODE SETUP" appears.
2. With the
confirm with the OK button
3. With the
and confirm with the OK button
4. The LCD display
button
5. Now press the device button
controlled by the global volume control.
6. If the specified device is equipped with a volume control,
"SUCCESS" will be displayed briefly and the menu will
close. From now on the volume control functions on the
device just specified.
7. If this device is not equipped with its own volume control
the URC will not allow this selection and shows "VOLUME
ERROR". Even then the menu will close. The volume con-
trol will then continue to function on the former device.
You can also deactivate the global volume control for specific
devices.
or
button
or
button
shows "ALL VOL SET". Press the OK
, the display changes to „ALL VOL MODE".
down for a little longer than
select "SYSTEM SETUP" and
.
select "VOL/MUTE SETUP"
for the device that is to be
.