Table of Contents
Advertisement
Operation Control
Temperature Selection
The beer froster can be set at warmer temperatures if that is desired.
Some brands of beer may taste better at slightly warmer temperatures.
If you find that it is necessary to change the temperature setting for your digital
thermostat controlled refrigerator, please refer to the following instructions. The front
panel of the thermostat is illustrated here:
To see the SETPOINT:
Push and immediately release the SET key -the display will show the SET point value.
Wait 5 seconds and the probe value will display again.
To change the SETPOINT:
Push and hold the SET key for more then 2 seconds to change the set point value; The
value of the set point will be displayed, and the "snowflake" LED will start blinking.
To change the SET value:
Push the up or down arrows to the desired setting; The new setting will be memorized
after 15 seconds, provided no other keys are pushed.
Digital Thermostat Instructions
melting
snowflake
Instructions for Use
snowflake
Up & Down arrows
"SET" key
Advertisement
Table of Contents
