Advertisement
Enter number 3 and then press return. The screen will show:
The card is configured as:
Enter number 1 and press enter. The system will configure the 4 port
card as tty1a, tty1b, tty1c, and tty1d. Repeat the above procedure to
configure a secondary 4 port card if required, the system will configure
the secondary 4 port card as tty2a, tty2b, tty2c, and tty2d. You may
then enable the tty by entering:
At this point you may connect the system up as necessary.
2 6
PCL-746+ User's Manual
1.
COM1
2.
COM2
3.
COM3
4.
COM4
# enable tty1a
# enable tty1b
....
....
# enable tty2c
# enable tty2d
Advertisement
