Advertisement
Depending on the option you ordered, you should find (in addition to
this manual) the following items inside the shipping container:
• One PCL-746+ 4-port serial card (with 16C550 or compatible UART)
• One 30-cm male DB-37 to four male DB-25 cable
We carefully inspected the PCL-746+ mechanically and electrically
before we shipped it. It should be free of marks and scratches and in
perfect working order on receipt.
As you unpack the PCL-746+, check it for signs of shipping damage
(damaged box, scratches, dents, etc.). If it is damaged or it fails to meet
specifications, notify our service department or your local sales
representative immediately. Also notify the carrier. Retain the shipping
carton and packing material for inspection by the carrier. After inspec-
tion we will make arrangements to repair or replace the unit.
When you handle the PCL-746+, remove it from its protective packag-
ing by grasping the rear metal panel. Keep the anti-vibration packing.
Whenever you remove the card from the PC, store it in this package for
protection.
Warning! Discharge your body's static electric charge by
8
PCL-746+ User's Manual
touching the back of the grounded chassis of the
system unit (metal) before handling the board. You
should avoid contact with materials that hold a static
charge such as plastic, vinyl and styrofoam. Handle
the board only by its edges to avoid static damage to
its integrated circuits. Avoid touching the exposed
circuit connectors.
Advertisement
