HP 3478A Technical Manual page 130

D-4. Tool and Test Equipment Requirements (Sec III)
a. Tool and Test Equipment Reference Code. The numbers in this column coincide with the numbers used in the
tools and equipment column of the MAC. The numbers indicate the applicable tool or test equipment for the maintenance
functions.
b. Maintenance Category. The codes in this column indicate the maintenance category allocated the tool or test
equipment.
c. Nomenclature. This column lists the noun name and nomenclature of the tools and test functions.
d. National/NATO Stock Number. This column lists the National/NATO Stock Number of the specific tool or test
equipment.
e. Tool number. This column lists the manufacturer's part number of the tool followed by the Federal Supply Code for
manufacturers (5 digit) in parentheses.
D-5. Remarks (Sec IV)
a. Reference Code. This code refers to the appropriate item in section II, column 6.
b. Remarks. This column provides the required explanatory information necessary to clarify items appearing in
section II.
D-4
TM 11-6625-3071-14