HP 3478A Technical Manual page 124

C-1. Scope
The appendix lists integral components of and basic issue items for Digital Multimeter, HP Model 3478A to help you
inventory items required for safe and efficient operations,
C-2. General
This components of End Item List is divided into the following sections:
a. Section II. Integral Components of the End Item. These items, when assembled, comprise the Digital
Multimeter, HP Model 3478A and must accompany it whenever it is transferred or turned in. The illustrations referenced
will help you identify these items.
b. Section III. Basic Issue Items. Not applicable.
C-3. Explanation of Columns
a. Illustration. This column is divided as follows:
(1) Figure number. Indicates the figure number of the illustration on which item is shown.
(2) Item number. The number used to identify item called out in the illustration.
b. National Stock Number. Indicates the National Stock Number assigned to the item and which will be used for
requisitioning.
c. Description. Indicated the Federal item name and, if required, a minimum description to identify the item. The
part number indicated the primary number used by the manufacturer, which controls the design and characteristics of the
item by means if its engineering drawings, specifications, standards, and inspection requirements to identify an item or
range of items. Following the part number, the Federal Supply Code for Manufacturers (FSCM) is shown in parentheses.
d. Location. The physical location of each item listed is given in the column. The lists are designed to inventory all
items in one
APPENDIX C
COMPONENTS OF END ITEM LIST
Section 1. INTRODUCTION
C-1
TM 11-6625-3071-14