Monte Carlo Fan Company 5LLR56 Owner's Manual And Installation Manual page 7

22
Attach light plate onto the plate on motor,
aligning its keyhole slots with the
preassembled set screws on the plate
and twist clockwise till lock. Reinstall the
screw removed in step 21. Tighten all
screws securely.
25
Attach light fixture onto the light plate,
aligning keyhole slots on the light fixture
with the preassembled set screws on
light plate and twist clockwise until lock.
Reinstall the screw removed in step 23.
Tighten all screws securely.
© 2014 Monte Carlo Fan Company
23
Light plate
Loosen 2 and remove 1 preassembled
set screws from the light plate. Save
screw for later use.
26
Place glass over glass fixed ring, aligning
the thread on light fixture and attach it
onto light fixture by turning clockwise till
tight.
Glass
Glass holder
7
24
Connect white wire from fan to white wire
from light fixture, and then connect blue
wire from fan to blue wire from light
fixture.
Light fixture
10/1/2014