Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
5LD52XXXD Series Fan
CUL Model NO. : 5LD52XXD
RETAILER NAME:
RETAILER ADDRESS:
7.5 kg
16.5 lbs
Total fan weight with light
Advertisement
Related Manuals for Monte Carlo Fan Company 5LD52 D Series
Summary of Contents for Monte Carlo Fan Company 5LD52 D Series
- Page 1 Owner’s Guide and Installation Manual 5LD52XXXD Series Fan CUL Model NO. : 5LD52XXD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 7.5 kg 16.5 lbs Total fan weight with light...
-
Page 2: Cautions And Warnings
Cautions and Warnings WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70) including fire-rated construction. - Page 3 Before you begin installing the fan, Switch Before installing this fan make sure the Use metal outlet box suitable for fan power off at Service panel and lock outlet box is properly installed to the support and use only the screws provided service disconnecting means to prevent house structure.
- Page 4 SAFETY CABLE INSTALLATION Wall switch White (Neutral) Power source Black (Live) Ground/Green Lag screw Black Blue Slot Safety cable White Washer Lock washer Install ball end of downrod into mounting For Canadian installation and for USA fan Make wiring connections using wire connectors provided as indicated above.
- Page 5 Flush Mount Installation Side cover Rubber pad Remove every other screws from yoke Remove side covers from canopy Reinstall the 3 set screws remove in step located on top of fan assembly. Keep exposing 4 holes. 2 closed holes and 2 12.
- Page 6 Blade Blade bracket Shipping stabilizers Install 2 of the screws to the side panel of Install blade bracket with blade by 3 blade Remove shipping stabilizers from motor mounting bracket corresponding to the screws and washers provided. Tighten assembly. open slotted holes on the canopy upper screws securely.
- Page 7 Glass Rubber washer Bulb Hex nut Final cap Rubber washer Hex nut Finial Install the switch housing cap with light Install 2 x 9W medium base dimmable Raise glass in order to guide pull chains through appropriate holes in glass, aligning fixture uses the set screws removed in LED bulbs.
-
Page 8: Troubleshooting
Troubleshooting or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, installation, please call our Customer Service Center at the number printed on your parts list insert sheet. Warning and lock the service panel to prevent the power from being switched back on accidentally. If the service panel cannot be locked to prevent the power from being switched on accidentally, securely fasten a warning sign to the service panel. - Page 9 Mar.2022...