Side Windows; Opening/Closing - SMART forfour Owner's Manual

G
WARNING
The reversing function does not react:
to soft, light and thin objects, e.g. small
R
fingers
while resetting
R
This means that the reversing feature can-
not prevent someone being trapped in these
situations. There is a risk of injury.
When closing, make sure that no parts of the
body are in the closing area. If someone
becomes trapped, press the switch to open
the side window again.
G
WARNING
If you close a side window again immedi-
ately after it has been blocked or reset, the
side window closes with increased or max-
imum force. The reversing function is then
not active. Parts of the body could be trap-
ped in the closing area in the process. This
poses an increased risk of injury or even
fatal injury.
Make sure that no parts of the body are in
the closing area. To stop the closing proc-
ess, release the switch or push the switch
again to reopen the side window.
Opening or closing the front side win-
dows
The switches for both side windows are
located on the driver's door. There is also a
switch for the front-passenger side window
on the front-passenger door.
The switch on the driver's door takes prec-
edence.
Left
:
Right
;
X
Turn the key to position 1 or 2 in the
ignition lock.
X
To open manually: press and hold the cor-
responding button.
X
To open fully: press the button beyond the
point of resistance and release it.
Automatic closing is started.
X
To close manually: pull the correspond-
ing button and hold it.
X
Vehicles with the comfort package:
To close fully: pull the button beyond the
point of resistance and release it.
Automatic closing is started.
X
To interrupt automatic opening/closing:
press/pull the corresponding switch
again.
i
If you press the switch beyond the point
of resistance while opening, automatic
operation is started. In vehicles with
the comfort package, you can also start
automatic operation when closing. To do
so, pull the switch beyond the point of
resistance.
You can stop automatic operation by
pressing again.
i
You can continue to operate the side
windows after turning the key to position
0 in the ignition lock or removing the
key. This function remains active for 3
minutes or until you open a door.

Side windows

Z
77