Table of Contents
Advertisement
9.
Replace the device formatter cover.
Figure 1-14
10.
Connect the power cable to the device.
11.
Turn on the power to the device.
HP Color LaserJet CM6030/CM6040 MFP
To install the USB card reader on an internal USB port on the HP Color LaserJet CM6030 MFP or HP
Color LaserJet CM6040 MFP, complete the following steps:
1.
Turn off the power to the device.
2.
Disconnect the power cable from the device.
3.
Remove all cables from the formatter board.
ENWW
Replace the cover — HP LaserJet M5035 MFP
Install USB card reader on internal USB port
15
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Access Control and is the answer not in the manual?
Questions and answers