Table of Contents
Advertisement
5.
Insert the supplied EIO plate with cable protection. Make sure to route the card reader's USB cable
through the plate.
6.
Insert the card reader into an unused internal USB port.
Figure 1-10
7.
Replace the device formatter cover.
8.
Connect the power cable to the device.
9.
Turn on the power to the device.
HP LaserJet M5035 MFP
To install the USB card reader on an internal USB port on the HP LaserJet M5035 MFP, complete the
following steps:
1.
Turn off the power to the device.
2.
Disconnect the power cable from the device.
ENWW
Internal USB port — HP LaserJet M3035 MFP
Install USB card reader on internal USB port
11
Hide quick links:
Advertisement
Table of Contents
