Hp Laserjet M3035 Mfp; Figure 1-8 Remove Formatter Cover - Hp Laserjet M3035 Mfp; Figure 1-9 Remove Eio Plate - Hp Laserjet M3035 Mfp - HP Access Control Install Manual

HP LaserJet M3035 MFP

To install the USB card reader on an internal USB port on the HP LaserJet M3035 MFP, complete the
following steps:
1. Turn off the power to the device.
2. Disconnect the power cable from the device.
3. Remove the device formatter cover.
Figure 1-8
4. Remove the existing EIO plate.
Figure 1-9
10 Chapter 1 External USB card readers
Remove formatter cover — HP LaserJet M3035 MFP
Remove EIO plate — HP LaserJet M3035 MFP
ENWW