Mitsubishi Electric PLK - G Series Technical Manual page 34

[Action Method 1] Reinstalling the System
The sewing machine is normally shipped with the system installed. However, if a reinstallation is
required for some reasons and others, reinstall the system using a USB memory, and follow the
method below.
(1)Save the system data in a USB memory.
(Refer to page[10]-8 [System data save to USB memory])
►Copy the [
memory.
(2)Turn the machine power OFF and insert the USB memory.
(3)While holding down the [F] key on the front panel of the control box, turn the machine power ON.
(Keep pushing [F] key until red LED on the front panel is turned on.)
(4)Installation is started. Please wait for a while.
]
folder where the installed system datas are included, into the root directory of USB
＋
[10] - 4
System
data