Optus FetchTv GEN 1 User Manual page 50

Optus TV USER GUIDE > MANAGE
NETWORK: IP SETTINGS
This page is for people who know about techy IP Settings stuff. If that's you, then this is where you change the
way your set-top box obtains its IP address – it will be set to Automatic by default. Only change your IP Settings
if you know how to manually configure your home network settings.
Change IP Settings
STEP 1
Use
Use
STEP 2
new setting using the number pad on your remote.
Use
STEP 3
(your set-top box will automatically restart to apply the new settings).
DEVICE INFO: OVERVIEW
This page shows the current status and configuration of your Optus TV set-top box to assist in
troubleshooting issues.
DEVICE INFO: OVERVIEW
Allows you to reset your set-top box using the following options:
• Factory Settings – Reset: restores all settings back to default (Parental PIN will not be reset, recordings
and series tags will not be lost).
• Set-top Box – Restart: set-top box will shut down completely (won't change your current settings, recordings
or series tags, but your active recordings will stop when the set-top box restarts).
• Format Disk – Reformat: reformats the hard drive in your set-top box (all settings, series tags and recordings
will be lost and you'll need your activation code to activate the set-top box once it restarts).
50
to select Manual and press
to select the setting you wish to change and enter the
to select Save and press
.
to save the new settings