Optus FetchTv GEN 1 User Manual page 11

Optus TV USER GUIDE > SETUP
ANALOGUE COMPOSITE VIDEO AND ANALOGUE STEREO AUDIO (GEN 2)
If your TV display doesn't have any other video input types, this is the mode for you.
Use the Yellow/Red/White cable when connecting.
Plug in all your bits and bobs:
1. Power cord connection.
2. TV antenna cable.
3. Yellow jack – video.
4. White jack – audio (left).
5. Red jack – audio (right).
6. Your own Internet connection to modem/router or powerline adapter.
7. Connect your Ethernet cable from the modem/router/powerline adapter to the set-top box network (RJ-45) port.
It should look something like this:
2
3
4 5
EXISTING ANTENNA CABLE
YOUR TV
2
3 4 5
7 1
YOUR MODEM
7
6 6
*ADSL or cable modem
11